Producción CyT
Congreso
Autoría
Prado Espinosa, A.
;
L RAMAJO
;
F Rubio-Marcos
;
K. Webber
;
CASTRO, MIRIAM SUSANA
Fecha
2018
Editorial y Lugar de Edición
Asociación Brasilera de Cerámica
Resumen
Información suministrada por el agente en
SIGEVA
Bismuth sodium titanate Bi0.5Na0.5TiO3 (BNT) is a lead-free piezoelectric material which exhibits significant remanent polarization (~38°C/cm2) and a Curie temperature of ~320°C [1]. Due to their properties BNT-based ceramics are considered as excellent candidates to replace conventional piezoelectric materials, in which the toxicity of lead has raised serious environmental problem, such as PbTiO3-PbZrO3 (PZT), PbMg1/3Nb2/3O3-PbTiO3(PMN?PT), etc. [2-3]. However, the BNT ceramics present...
Bismuth sodium titanate Bi0.5Na0.5TiO3 (BNT) is a lead-free piezoelectric material which exhibits significant remanent polarization (~38°C/cm2) and a Curie temperature of ~320°C [1]. Due to their properties BNT-based ceramics are considered as excellent candidates to replace conventional piezoelectric materials, in which the toxicity of lead has raised serious environmental problem, such as PbTiO3-PbZrO3 (PZT), PbMg1/3Nb2/3O3-PbTiO3(PMN?PT), etc. [2-3]. However, the BNT ceramics present a moderate piezoelectric coefficient (d33=74pC/N) and a high coercive field (~73kV/cm) [4] which difficult the polarization process. As an alternative to improve the dielectric and piezoelectric properties of this material, the formation of solid solutions of BNT as (1-x)Bi0.5Na0.5TiO3-xBaTiO3,(BNT-BT), has been proposed [5]. The excellent properties of this system are attributed to the existence of a morphotropic phase boundary (MPB), between rhombohedral and tetragonal crystal symmetries. In this work, we present a simple method to prepare (1-x)Bi0.5Na0.5TiO3-xBaTiO3 (x= 0.0, 0.04, 0.06, 0.07, 0.08, 0.09) based lead-free piezoelectric ceramics through the solid-state reaction route. Powders were mixed in different compositions near of morphotropic phase boundary and the influence of the BT concentration on ceramics was investigated in order to understand the relations of structural phase stabilization, microstructure, and piezoelectric and ferroelectric properties. References: [1] M. Cernea, L. Trupina, C. Dragoi, B. S. Vasile, R. Trusca, J. Alloys Compd. 515 (2012) 166-170. [2] B. J. Chu, D. R. Chen, G. R. Li, Q. R. Yin, J. Eur. Ceram. Soc. 22 (2002) 2115-2121. [3] D. White, X. Zhao, M. F. Bresser, X. Tan, J. Mater. Sci. 43(15) (2008) 5258?5264. [4] X. Wang, Y. Li, Y. Gao, Z. Wang, L. Chen, Nano Energy. 13 (2015), 687?692. [5] T. Takenaka, K. Maruyama, K. Sakata, J. Appl. Phys. 30 (1991) 2236.
Ver más
Ver menos
Palabras Clave
Raman spectroscopyLead-free piezoelectricLead-free piezoelectric