Use of sand coating to improve bonding between GFRP bars and concrete

Artículo

Autoría

Morales Arias, Juan Pablo ; Vázquez, Analía ; ESCOBAR, MARIANO MARTIN

Fecha

2012

Editorial y Lugar de Edición

Sage Publications

Revista

JOURNAL OF COMPOSITE MATERIALS, vol. 46 (pp. 2271-2278) Sage Publications

Resumen Información suministrada por el agente en SIGEVA

Glass fiber-reinforced polymer bars are currently used to reinforce concrete in an attempt to overcome the corrosion issue encountered with ordinary steel. Different types of surface treatment were applied to the smooth rods in order to enhance bonding with concrete. Experimental results show that using bars coated with coarse sand notably improve the bond strength. The influence of granulometry sand, rebar diameter, length embedded, and concrete strength are analyzed. Rebars coated with finer ... Glass fiber-reinforced polymer bars are currently used to reinforce concrete in an attempt to overcome the corrosion issue encountered with ordinary steel. Different types of surface treatment were applied to the smooth rods in order to enhance bonding with concrete. Experimental results show that using bars coated with coarse sand notably improve the bond strength. The influence of granulometry sand, rebar diameter, length embedded, and concrete strength are analyzed. Rebars coated with finer sand lead to a stronger chemical adhesion with concrete. However, the effect of friction and interlocking forces produced by coarse sand prevails over the chemical adhesion in the pull-out test.

Ver más Ver menos

Palabras Clave

polimeroscompuestoshormigónbarras unidireccionales

Descargue o solicite el texto completo

http://hdl.handle.net/11336/20128